Vehicle Fitment
Make | Model | Year |
---|---|---|
Chevy | Kodiak | 1980-1986, 1988, 1990 |
GMC | Brigadier | 1981 |
Topkick | 1980-1988, 1990 | |
W-Series | 2003 | |
Workhorse | P-Series | 2001-2004 |
Make | Model | Year |
---|---|---|
Chevy | Kodiak | 1980-1986, 1988, 1990 |
GMC | Brigadier | 1981 |
Topkick | 1980-1988, 1990 | |
W-Series | 2003 | |
Workhorse | P-Series | 2001-2004 |
Infinity 308™ Programmable ECU (30-7113) by AEM Performance Electronics®. Designed for the price conscious racer, the Infinity Series 3 incorporates all of the features necessary to run a high-performance engine including airflow-based VE tuning for fuel injection control, ignition control, Flex Fuel, knock control, boost control, nitrous control, launch control, wheel speed-based traction control and engine protection. The Series 3 is able to communicate with 3rd party dashes and loggers and is AEMnet CANbus enabled to easily communicate with other AEMnet equipped devices. All maps can be password protected. Its latest generation 200MHz processor can process 400 MIPS (Millions of Instructions Per Second).
4-Stroke Engines: Yes |
Cylinders: Up to 8 |
High Impedence Injectors (Sequential): 8 |
Low Impedence Injectors (Sequential): 2 |
Coil Drivers (0-5V Falling Edge): 8 |
Coil Drivers (to drive "Dumb" Coils or CDI): 1 |
VR/Mag Inputs: Up to 2 |
Analog Voltage Inputs: Up to 9 |
Analog Temp Inputs: Up to 3 |
Knock Control: 2-Channel |
Low Side Outputs: 10 |
Low Side Outputs that can be PWM: 7 |
4-Wire Stepper Motor Control: Yes |
CAN Channels: 1 |
RS232 Channels: 1 |
Boost Control (RPM, Time, Gear, VSS, Switch Input, Flex Fuel Content): Yes |
Variable Cam Control: N/A |
Engine Protection: Yes |
Launch Control: Yes |
Nitrous Control: Single Stage |
Traction Control: Up to 2-Wheel Speed |
Data Logging: Basic Engine History |
Weather Resistant Sealed Electronics: Yes |
Connector Pins: 73 |
Enclosure Dimensions: 7.35" x 6.55" x 1.8" |
Weight: 29.9oz / 848g |
Air/Fuel Ratio (AFR) feedback is supported by adding external wideband controllers through 0-5V analog inputs or via AEMnet CANbus using AEM’s X-Series Wideband UEGO AFR controllers. An Engine History feature is included that records basic engine operating conditions including Run Time, Peak RPM (overrev), Oil Pressure/Temp Overheat (requires sensors, sold separately) and Lean Condition (Boost/Vacuum vs AFR). All of the parameters of the Engine History feature are user programmable. Both systems feature a small, thin footprint (7.35” x 6.55” x 1.8”), lightweight (29.9oz/848g) and 73-pin connectors. The Infinity Series 3 enclosure is fully sealed and the connectors are IP67 rated (dustproof, waterproof to 1 meter) making the Infinity suitable for engine bay mounting.
Infinity Series 3 Programmable EFI Overview
AEM's Infinity Series 3 Programmable ECU platform is designed for popular early- and late-model throttle body and port injected Ford, GM and Mopar V8s. The Series 3 ECUs are simplified engine controllers designed to run a basic race, marine or crate engine without the need for, or cost of, additional features like variable cam control, Drive-by-Wire throttle control or internal wideband air/fuel sensor controllers.
Infinity 308 Programmable EFI
The Infinity 308 features two different injector types and two different coil outputs that support three different types of fuel and ignition configurations. For throttle-body-injected (TBI) and GM multi-port fuel injected V8s the Infinity 308 includes a single direct-drive ignition coil output to work with a distributor and a single coil, and 2 peak & hold injector drivers that can drive up to four high-impedance injectors each. Other port injected and single-coil distributed V8 engines like the Ford Windsor can be controlled using the Infinity 308’s 8 high impedance injector drivers and single direct-drive coil output. For the Chevy LS, the Infinity 308 has 8 high impedance injector drivers and 8 “smart” coil outputs to drive a coil-near-plug ignition system.
Infinity 308 MEFI Upgrade
The Infinity 308 is a great upgrade for users looking to replace their older MEFI-4 system. This system also provides users with an upgrade path to sequential port injection and “smart” coil-near-plug ignition. A Plug & Play Adapter harness to install an Infinity 308 on engines using MEFI controllers is available in our Plug & Play Adapter Harnesses section.
At AEM Performance Electronics®, they set the standard in the performance aftermarket by providing racers and car enthusiasts around the world with innovative performance car electronics that are engineered to outperform. The company has a deep appreciation for those who trust in its products and makes it its mission to deliver superior sports car performance parts that will exceed your expectations. Take a look at AEM’s inventory of aftermarket car performance parts, and you'll find innovative and high-tech products that are engineered to outperform. When you are ready to buy performance car parts, you can count on AEM to deliver quality products every time. Quality, combined with reliability and value are why you want to choose AEM as your aftermarket car performance parts company. You won't regret it!