Product Details
Mean Machine Series 4000W Mono Class D Amplifier by Autotek®. Autotek MEAN MACHINE series of car audio amplifiers bring extreme power with PRO-FI™ High Speed MOSFETS and high sound quality with minimum distortion levels. This amplifier features 4000 watts of power in a 1 Ohm stable monoblock amplifier designed to power a mono subwoofer system. The Class D technology provides extreme power in a smaller footprint. The amplifier can be run from the "output" RCA connections which minimize the need for additional cables running the length of the vehicle.
Specifications
Class: Class D |
Variable Voltage: 6V - 0.2V |
Signal to Noise: 95dB |
Frequency Response: 10Hz - 250Hz |
Crossover: Electronic |
Variable Low Pass Crossover 12dB per Octave: 40Hz - 300Hz |
Tone Control/Parametric EQ: Built-in bass control |
Bass Boost: 0 - 12dB |
Subsonic Filter: 10Hz - 40Hz |
Power @ 1 Ohm: 1 x 4000W |
Power @ 2 Ohm: 1 x 2000W |
Power @ 4 Ohm: 1 x 1000W |
Mono Bridged @ 4 Ohm: 1 x 4000W |
Total Channels: Mono |
Audio Inputs: RCA Jack |
Audio Outputs: RCA |
Power Terminal 12V/GND: 4 AWG |
Speaker Terminal Wire Gauge: 8 AWG |
Fusing: 60A x 2 |
Total Harmonic Distortion (THD): Less than 0.10% |
Features
- Low Noise Pre-Amplifier Circuitry - Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
- RCA inputs and outputs provide the highest sound quality connection
- High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
- 2 channel operation mode allows either stereo or mono bridged operation
- FULL / LPF / HPF for complete control of amplifier signal which is essential when using two or more amplifiers
- Electronic equalizer provides control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subwoofers
- Class A/B amplifiers have larger heatsinks with very musical bass
- MEAN MACHINE'S ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
- Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
- High energy PWM (Pulse Width Modulated) power supply provides Maximum power with minimal electrical impact
- Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion
- Angled, Allen Key connectors provide easy access for hand tools allowing a quick and secure connection
- Full-range signal pass through output allows additional amplifiers to be run from the "output" RCA connections which minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise
- Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
Autotek® has been going to SPL, SQ contests, trade shows, jamborees, cruises, Coffee with Cars, and Show and Shines for more than 30 years. In the early 80’s, Autotek was founded by automotive trendsetters with a demand for real audio in their cars, trucks, and garage built projects. From an ancient Dolby B auto-reverse cassette head unit in 1977 to today’s iGadgets and pocket Droids, Autotek delivers solid musical bass, powerful efficient amplifiers, and “band in the front seat” realistic speakers.