BlackVue® RVS-PMP - Power Magic Pro Battery Drain Prevention Device

Enable Parking Mode for your BlackVue dash camera
Power Magic Pro is a hardwiring kit that supplies power from your car to your BlackVue, while protecting your vehicle's battery. Parking Mode switch on: power is supplied to your dash camera even when your vehicle's ignition is off, allowing for Parking Mode recording. Parking Mode switch off: power is not supplied to your dash camera.

Two systems to avoid discharging the battery
Power Magic Pro allows to configure both timer and voltage cut-off values. Power Magic Pro will cut the power to the BlackVue based on both Timer or Voltage Cut-off value, whichever comes 1st. The timer can be set from 6 hours to infinite. In addition to the timer, Power Magic Pro lets you set a voltage cut-off value. As soon as the voltage from your vehicle's battery drops to the cut-off value, Power Magic Pro will stop powering your dashcam, thus saving your battery.

Once installed, enjoy Parking Mode worry-free
Simple instructions guide you connecting it to your vehicle´s fuse box. Once connected, choose the best place and fix it with either the double-sided tape or the provided screws. Power Magic Pro supports all BlackVue dash cam models, either with one or two channels.

Optional
The fuse taps allow you to easily hardwire your BlackVue dashcam to your car's battery in combination with the Power Magic Pro hardwiring kit that enables Parking Mode. The fuse taps come in 3 variations, so make sure you choose the one adapted to the fuse box in your car. Fuse Tap for Power Magic Pro with 3 options: Mini Fuse Tap, Low-profile Mini Fuse Tap, ATO Fuse Tap