Product Details
3-Piece Nano Surface Primer System Set by Dr Beasleys®. NANO SURFACE PRIMERS are a 3-product system of fully inorganic paintwork correction solutions, specifically engineered to prime for ceramic nanocoating application. This system corrects defects, builds a thick coating foundation and lays down adhesion points for bonding. The Nano Surface Primer System utilizes Dr. Beasley’s DxPrime technology to achieve total coating perfection. DxPrime uses advanced technologies like nanogel and microsphere abrasives to correct paintwork in a way that ensures a durable coating.
Includes
- NSP 45
- NSP 95
- NSP 150
Features
- ENSURES LONG LASTING COATINGUsing NSPs to correct makes coatings last longer by optimizing for coating bond
- ABSOLUTELY NO OILS OR RESIDUEZero organic content eliminates IPA/panel wipe step to expedite application process
- GET BETTER CUT FASTERMicrosphere abrasives cut faster and more evenly to deliver quick but stellar results
- BRILLIANT GLOSS THAT’S BUILT TO LASTNSPs deliver an impeccably smooth surface for an enduring shine that’s filler-free
- NANOGEL BASE: No silicone oils, wax or fillers — 100% body shop safe. Protects work to keep surface scratch and contaminant-free. Builds coating thickness for robust protection
- MICROSPHERE ABRASIVES: Spherical shape delivers smooth and level paint surface. Maximized cutting facets correct defects faster. Precision sized for 3 grades of consistent cut
- DESIGNED FOR CERAMIC COATINGS: No organic content to eliminate IPA/panel wipe step. Lays an adhesion matrix of anchor points. Produces ultra smooth paint to amplify coating gloss
System Instructions
- 1. Prep vehicle. For best results, wash with Dr. Beasley’s Premium Body Wash, decontaminate with Dr. Beasley’s Total Decon, Dr. Beasley's Clay Spray and clay bar. Tape off crevices and sensitive areas.
- 2. Tape off a section of the hood or any other flat panel. Visually inspect paint using a powerful light to determine severity of defects.
- 3. Based on your inspection, conduct 5-7 section passes using the least aggressive NSP and pad combination required to deliver the desired results. (For deep scratches, start with NSP 150. For fine scratches and oxidation, use NSP 95. For light micro marring and finishing, use NSP 45).
- 3A. Inspect again. If desired results were achieved, conduct another 5-7 section passes using the next NSP down in terms of aggressiveness, matching pad as necessary. Finish with NSP 45 and wipe the panel twice with a dry microfiber towel. Repeat steps going one small area at time until all paintwork has been buffed to desired results.
- 3B. If desired results were not achieved, conduct another 5-7 section passes using the next NSP up in terms of aggressiveness, matching pad as needed. When desired results are achieved, continue with 5-7 section passes using the next NSP down in terms of aggressiveness. Finish with NSP 45 and wipe the panel twice with a dry microfiber towel. Repeat steps going one small area at time until all paintwork has been buffed to desired results.
- 4. Wipe all panels again with a dry microfiber towel and continue to ceramic coating application. No IPA wipe or wait time is required beforehand.
The NSP system can be used in any combination depending on the unique needs of the vehicle to be coated. When used as a complete system, NSP 150 works to remove deep scratches and begin building thickness. NSP 95 follows to remove lighter scratches and oxidation while continuing to build thickness. Finally, NSP 45 finishes the surface to produce a deeply glossy finish with anchor points ready to crosslink with the ceramic coating to come.
Dr. Beasley's® a team of detailers, chemists, enthusiasts, and car nuts who design, formulate, and manufacture detailing products. Dr. Beasley's set out to create the best detailing products available. Choosing high quality ingredients while eliminating harmful chemicals from Dr. Beasley's formulas allows us to produce the safest, highest quality products possible. There's a better way to detail your car. Let us show you how.