Dr. Beasley's® PK19 - Nano-Resin Kit

Why The Nano-Resin Kit?
The Nano-Resin Kit gives you the full toolset you'll need to apply a Dr. Beasley's Nano-Resin ceramic coating. But what does that mean for you?

One Box, All The Tools
If you want to get the most out of your ceramic coating, you need to have a properly prepped surface and the right tools for application. And when it comes time to coat, you shouldn't have to scramble for what you need - you should have it all right in front of you, ready-to-go! That's why the Nano-Resin Kit comes with everything you need to prep your surface and apply the coating. From Paint Coating Prep to the foam applicator and two suede cloths, you'll be fully prepared to apply. Don't find yourself scouring the garage when you go to coat your car - go with the kit that hands you it all.

Professional Results At Home
A good number of ceramic coating brands require professional installation by an authorized detailer. Because Dr. Beasley's work with enthusiasts and professionals alike, that sort of gatekeeping never sat right with us. So when Dr. Beasley's developed Nano-Resin, Dr. Beasley's went out of Dr. Beasley's way to design a coating kit that could be used by anyone. That's why the Nano-Resin Kit comes with all the tools you need, detailed instructions, and an easy installation process so you can get a professional coating from the comfort of your home.

Everything You Could Want In A Coating
There's no shortage of incredible features a Nano-Resin coating offers. It's ultra durable, offering years of protection even on daily drivers. It produces a magnificent, candy-like gloss with considerable warmth and depth. Its superhydrophobic surface beads liquids to prevent staining and makes tough contaminants like tar or sap slide right off with a simple rinse. Its protective barrier resists micro-marring, etching, UV fading and even self-heals wash marks. But it's not just durable - it's flexible too. Nano-Resin will flex with your panels as they distort, ensuring no separation or cracking occurs.

How Does It Work?
When applied to a surface primed with Paint Coating Prep, Nano-Resin creates a cross-linked mechanical bond with your paint, fusing with it to form a 3D-structured barrier that lowers surface energy for superhydrophobicity, fills in imperfections for added gloss, and resists etching, marring and UV fading.

Application Instructions
1. Before applying Nano-Resin, the vehicle's paint must be prepped. Clay and polish the vehicle's paint with a light compound and a random orbital machine buffer. If the vehicle's paint is heavily scratched, paintwork correction may be required.
2. Spray Paint Coating Prep onto a panel and wipe off with a clean towel. This will remove any excess residue while providing anchor points so that Nano-Resin can fully bond to the surface.
3. Wrap the suede cloth around the foam block applicator and apply ~10 drops of Nano-Resin on the cloth in a line.
4. Move the applicator in vertical lines down the panel. After you've covered your panel with vertical lines, go back and repeat with horizontal lines. This crosshatch pattern ensures full coverage. Avoid getting the product in panel gaps.
5. When you see the product flashing (it will appear slightly iridescent), wipe the panel with a clean, dry microfiber towel.
6. Repeat steps 4-5 on each panel until all of the vehicle's painted surfaces are protected. Reapply several drops of Nano-Resin to your applicator as needed.
7. After application, allow the coating to cure on the vehicle undisturbed for one hour. This can be sped up using infrared lamps.

Dr. Beasley's Suggests
Do NOT apply Nano-Resin in direct sunlight. Do not allow this product to freeze during storage.
If applied in temperatures less than 65-70 degrees the vehicle may need more flash time. In warmer, more arid climates Nano-Resin will need less flash time.
Inspect the vehicle in natural light for a better view of high spots.
Keep vehicle completely dry between applications and for at least 1 hour after final application. After 1 hour the vehicle can be exposed to light rain without affecting the bonding process.
Full cure will take 24-48 hours. After fully cured the surface will be noticeably glossier and the coating will be at full hardness.
Leaving the vehicle in the sun or under infrared lamps after application will shorten the amount of time needed for Nano-Resin to bond to the paint surface.
Avoid washing the vehicle with soap for 7 days after application. After this follow Dr. Beasley's prescribed maintenance regimen.
Keep bottle closed when not in use.
Apply AdvanceCoat: Gloss once every 3-4 months or as needed to restore hydrophobicity and gloss.