Name: Phillips Industries® - Dual Pole Connector
Brand: Phillips Industries
SKU: mpn4513238962
Price: 27.17 USD
Availability: InStock

Vehicle Fitment

This part is universal

Product Details

Universal Dual Pole Connector by Phillips Industries®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Features

Provides separate power and ground connections
Accepts 4 ga. wire only
Separate ground pin for ground return systems
Battery terminal crimp is required for assembly
Built to offer superior performance for a long time
Made to bring exceptional durability and reliability
Manufactured to meet the highest quality standards

Phillips Industries® is here with excellent products that are available at a competitive price. The company does its utmost to provide the best possible solutions for your needs. All products by Phillips Industries are made with expert care and created by professionals to meet all your requirements. The company does not accept compromises when it is going about quality, so you can be sure that all products have only first-rate quality. With many years of manufacturing experience, Phillips Industries® is the name you can trust.

Phillips Industries® is a leading supplier of parts for trucking industry. The company was built on a signal arm when a patent was awarded to Phillips founder Hugh Phillips in 1928. The company began manufacturing the reflective signal arm two years later, and this single product became the foundation on which the company's success was built.

Brand:

Phillips Industries

Part Number:

15-336

Warranty

Basic Warranty Policy:
Phillips Industries offers a limited warranty to the original purchaser that the warranted products are free from defects in workmanship and/or materials only. Charges for additional incidental or consequential damage cannot be accepted. Phillips' policy is to replace the warranted product if the product fails because of defects due to workmanship and/or materials within the limited warranty period from the original production date. The warranty is not transferable and applies only to the original owner of the Phillips product.

Product Warranty Time Limits
ABS LECTRACOIL™: 3 Years
ABS LECTRACOIL™ w/ QCP™: 5 Years
Specialized Harnesses: 1 Year
Dual Pole Assembly, Economy: 1 Year
Dual Pole Assembly, Heavy-Duty: 2 Years
Electrical Connectors: 1 Year
Electrical and Air Hose Assembly: 1 Year
i-Box™: 1 Year
Gladhands: 1 Year
PERMALITE™ Fluorescent Interior Lamps: 1 Year
PERMALITE™XB LED: 3 Years
POLAR AIR® Extreme Weather Air Coil: 3 Years
POLAR AIR® w/ Gladhands: 3 Years (Air Coil)/1 Year (Gladhand)
Pre-Made Rubber Air Lines: 1 Year
QCP™ Quick-Connect Plug: 3 Years
STA-DRY® Electrical Trailer Harnesses: 10 Years (North America only)/2 Years (All others)
STA-DRY® S7™ Swivel Socket: 3 Years
AIR-DEFENSE™ SYSTEM: 5 Years (housing)

Limited Harness Warranty
To be eligible for above limited warranty coverage, the electrical harness system must have been installed properly and connections disconnected during maintenance applications have been resealed using corrosive inhibiting grease. Product modifications, cut wires or parts replaced by non-standard parts, will void the limited warranty.

The warranty is valid when the following conditions exist:
• The part is a genuine Phillips OEM installed part
• The part has been properly maintained
• The part is inside the warranty time limits
• The part is functionally defective
• Excessive wear and tear has not occurred
• Abuse such as “Pull-away”, jacketing rips or tears have not occurred

Not a Phillips Part:
Items received by Phillips Industries as warranty claims that are not Phillips parts will be denied and parts scrapped.

Abuse:
1. Products with tractor pull away type damage, socket and/or nose box breakage are not warranted. Cable length should be checked with truck in far right turn condition to ensure cables are not overextended beyond their working length. Phillips does not warrant any tractor to trailer cable assembly with less than 180 inches (15’) of working length.
2. Product damaged by blunt force.
3. Jacket damage in the form of abrasion, tears or rips.

Installation error:
Part installation error at factory or service center caused premature product failure. i.e., cable jacket rubbing against frame, non-metallic part installed over uneven surface causing stress fracture or breakage or installation screws piercing harness. Corrosion beyond the scope of product specification:
Unless otherwise stated, Phillips will not accept corrosion as a warranty claim. (Preventative maintenance will prevent many part failures. Many states are using Magnesium Chloride or Calcium Chloride as de-icers, which cause severe corrosive action to electrical systems.)
Note: If a damaged or defective part is returned to Phillips for analysis it will be destroyed following the analysis unless specific instructions are included with the product requesting its return.

Helpful Hints:
• Use 15 foot cables. 12 foot cables should be used for trailer to trailer connections, not tractor to trailer. Most find 12 foot cables are too short for most tight turn applications.
• Filter screens should be used on gladhands. Doing so, keeps road junk, insects and foreign materials out of the air system.
• Use Tracker Bar or Pogo Sticks to prevent chaffing or damage to trailer cable. If using 2 electrical cords such as an ISO cable, 2 Tracker Bar springs should be used.
• Any electrical connection that is opened should be re-greased before it is reconnected.
In no event shall Phillips be liable for any incidental, indirect, consequential or like damages, including specifically, but without limitation, lost profits, savings or revenues of any kind, whether or not Phillips has been advised of the possibility of any such damages or the like, including any case in which a product of Phillips purchased hereunder creates or contributes to a vehicle or other product repair campaign or recall due to a vehicle or other product defect or non-compliance with the United States National Motor Vehicle Traffic Safety Act or other similar federal or state laws.
The warranties provided here are in lieu of all other warranties, express or implied. There are no warranties which extend beyond those here stated, all of which Phillips expressly disclaims, including the implied warranty of fitness for a particular purpose and/or the warranty of merchantability.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Phillips Industries® - Dual Pole Connector

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!