Vehicle Fitment
This part is universal
Product Details
Big Bang Series 4000W Mono Class D Amplifier by Planet Audio®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.
Specifications
| Channel Configuration: 1 Channel |
| Amp Topology: Monoblock Class D |
| Power Supply Type: MOSFET Power Supply |
| Total Power Output: 4000W |
| Peak Power @ 2 ohm: 2000W x 1 |
| Speaker Impedance: 1 to 8 ohm |
| Frequency Response: 10 Hz to 250 Hz ±1 dB |
| Peak Power @ 1 ohm: 4000 W x 1 |
| RMS Power @ 4 ohm: 750 W x 1 |
| S/N Ratio (A-Weighted): 7 dB |
| RCA Inputs: 2 Channel |
| Low Pass Filter: 50 Hz to 250 Hz |
| Bass Boost: Variable 0 to 18 dB |
| Subwoofer Level Control: Yes |
| Thermal/Overload/Short Protection: Yes |
| Pre Amp Outputs: 2 Channel |
| Subsonic Filter: 10 Hz to 50 Hz |
| Phase Control: 0 to 180° |
| Input Sensitivity Switch: Yes |
| Heavy Duty Set-Screw Style Terminals: Illuminated Logo |
| Dimensions: 17.13" L x 7" W x 2.44" H |
Features
- Up to 3000W X 1 RMS @ 1 ohm
- Up to 1500W X 1 RMS @ 2 ohm
- Up to 750W X 1 RMS @ 4 ohm
- Monoblock Class D, MOSFET Power Supply
- Low Level Inputs, RCA Pre-amp Outputs
- Variable Low Pass Crossover, Variable Bass Boost and Variable Subsonic Filter and Switchable Phase Control
- Include Remote Subwoofer Control
1 Ohm Stable
[:os:]The lowest impedance accepted by this amplifier is 1 ohm. Amplifiers that are 1 ohm stable produce the most power possible from the amp. An amplifier capable of delivering power at a 1 ohm load is usually reserved for serious subwoofers that can handle the power. Please note this particular amp needs a healthy electrical system including a low gauge wire capable of delivering the necessary current.
[:os:]
Class D Amps
[:os:]Class D is a high speed switching amplifier technology that is more efficient, generates less heat and draws less power than traditional Class A/B amps. Planet Audio use Class D in monoblock amplifiers to give you massive amounts of power in a relatively small footprint for clean, powerful, bass.
[:os:]
Phase Control
[:os:]The phase control feature allows you to adjust the speakers phase to ensure all audio signals are playing together rather than against each other. When bass notes are noticeably absent, a quick and easy adjustment to the phase control could provide the perfect remedy.
[:os:]
Protection
[:os:]If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.
[:os:]
Selectable LP Slope
[:os:]A Selectable Low-Pass Slope on subwoofer amplifier is priceless; it allows you to choose between a 12dB or 24dB slope. As the slope dictates the rate at which the crossover cuts off, this feature provides another tool for you to fine tune your subwoofer system.
[:os:]
Subsonic Filter
[:os:]A subsonic filter is designed for use on subwoofers. Since not all subwoofers can reproduce the same low frequencies, the subsonic filter can be set for optimum bass response in order to keep the driver playing efficiently.
[:os:]
Subwoofer Level Control
[:os:]The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.
[:os:]
Switchable Input Sensitivity
[:os:]Switchable Input Sensitivity gives you the freedom to connect the amp to any standard source unit and have peace of mind it will be within range to properly match the output of the source unit allowing you to use the volume controls on your source unit the way it was designed.
[:os:]
Variable Bass Boost
[:os:]Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
[:os:]
Variable Gain Control
[:os:]Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.
[:os:]
Variable Low Pass Filter
[:os:]Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Since 1996 Planet Audio® has become a World leader in mobile audio and video entertainment. The company's World headquarters is located in Oxnard, CA, along with its Research and Development division as well as manufacturing facilities in China, Brazil, Taiwan, California and Seoul, Korea. Today, even in the midst of rapidly advancing in-vehicle technology, their audio and video components incorporate flawlessly into today’s ever expanding new life styles and vehicles alike. Planet Audio is a seasoned manufacturer of mobile entertainment and information systems with a focus on performance and integration.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!