Vehicle Fitment

Make	Model	Year
Ram	4500	2011-2015
Ram	5500	2011-2015

Product Details

Manual Transmission Bearing and Seal Overhaul Kit by SKF®. Inside Diameter: 11.500". Outside Diameter: 11.000". Take your vehicle out of your garage back to the road by replacing your worn out or defective part with the top-notch SKF component. It will help restore and maintain your vehicle's original health and dependability without breaking a sweat. Meticulously engineered and crafted from the finest materials, this product is designed to ensure a perfect fit, OE-style look and reliable performance for many years to come.

Specifications

Inner Diameter: 11.500"

Outer Diameter: 11.000"

Width: 2.500"

Features

Excellent replacement for your worn out or faulty part
Designed to restore original performance and reliability
Premium quality construction for long-term durability
Manufactured using advanced equipment
Rigorously tested to ensure the finest product value possible
Made to meet or exceed the most stringent industry standards

Keeping your prized possession in tip-top working order is critical both for its performance and lifespan. Unfortunately, nothing's eternal and so are your vehicle's parts that are prone to wear out during the lifetime of extensive use or fail due to exposure to the elements, inappropriate maintenance and many other factors. If you start noticing something out of the ordinary, check and replace your old, worn out, malfunctioning or failed parts as soon as possible to prevent further costly repairs. If you need to restore the original performance of your automobile, you can count on SKF, a trustworthy manufacturer of top-grade bearings and units, seals, mechatronics, and lubrication systems. Manufactured with exceptional quality standards and superior reliability in mind, they are sure to quickly troubleshoot your problems and restore your vehicle's overall well-being. Swap out your worn out or failed component with this superior and dependable SKF replacement part that will help you complete your repair without a hitch. Made to OE standards and rigorously tested for quality, performance and durability, this top-notch part looks, fit and works as flawlessly as your original. This SKF component is made from the finest materials to ensure long-term durability and value.

SKF Authorized Dealer

Nowadays one can find SKF® products in almost anything that moves or rolls, from skateboards to space shuttles, but long time ago, in 1907, the company started out as a bearing manufacturer. Today, SKF is an industry leader in the design and development of top-grade bearings, including ball, roller, and plain bearings, rod ends, bushings, housings, seals, etc. All SKF parts are made from high-quality materials for maximum performance and durability. SKF bearing units come preassembled and adjusted at the factory to ensure a perfect fit and ease of installation.

Brand:

SKF

Part Number:

STKFC200

UPC:

085311543361

Warranty

Subject to the terms and conditions contained herein, SKF warrants to the Buyer that for the warranty period indicated below the products sold by SKF that are listed below (the “Products”), when properly installed, maintained, and operated, will be free from defects in material and workmanship and shall be fit for the ordinary purposes for which the Products are designed.

Buyer’s limited remedies

This limited warranty defines SKF’s sole and exclusive liability and Buyer’s sole and exclusive remedy for any claim arising out of, or related to, any alleged deficiency in any Product sold by SKF, even if such claim is based on tort, including negligence or strict liability, breach of contract, or any other legal theory. SKF may, at its sole option, modify, repair, or replace the Product.

Warranty period

Except as expressly provided below, the warranty period for each Product shall commence on the date of purchase of the Product.

90-day warranty

Products warranted for ninety (90) days by SKF are as follows: cable assemblies, Marlin QuickConnect (MQC), magnetic temperature probes, and all refurbished equipment.

One-year warranty

Products warranted for one (1) year by SKF are as follows: all Microlog products and accessories, all Microlog Inspector applications, including hand-held computers, all Marlin data managers (MDM), all Marlin Condition Detectors (MCD), all Wireless Machine Condition Detectors (WMCD), all Multilog On-line Systems (IMx), all Multilog Condition Monitoring Units (CMU, TMU), Multilog Local Monitoring Units (LMU), all Multilog Wireless Monitoring Units (WMx), all Wireless Monitoring Systems V/T, all Vibration PenPlus, all Machine Condition Advisers, all transmitters, all Monitor Interface Modules (MIM), all Machine Condition Transmitters (MCT), MicroVibe P and Custom Products with the prefix of CMCP, with the exception of any consumable or expendable items.

Two-year warranty

Products warranted for two (2) years by SKF are as follows: all standard Eddy Probes, Eddy Probe Drivers, and Eddy Probe Extension Cables, all Multilog On-line Systems (DMx), and all M800A and VM600 Machinery Monitoring Systems. For all On-line Systems that have satisfied Criteria 1 and 2 below, the warranty period shall be either thirty (30) months from the date the On-line System is purchased, two (2) years from the date the On-line System is installed by SKF, or two (2) years from the date, on which the installation of the On-line System has been audited.

Criteria 1.

Devices used with a Multilog On-line System (IMx), Multilog Condition Monitoring Unit (CMU), Multilog Local Monitoring Unit (LMU), including, but not limited to, the sensing device, the interconnect cabling, junction boxes, if any, and the communications interface, must consist only of SKF-supplied or SKF-approved devices and/or components.

Criteria 2.

SKF or its authorized service representative has installed the On-line System or has audited the installation and commissioned the On-line System. “On-line Systems” are defined as systems consisting of Multilog On-line System (IMx), Multilog Condition Monitoring Unit(s) (CMU), Multilog Local Monitoring Unit(s) (LMU), and any sensing or input devices, the interconnect cabling between the sensing or input devices and the Multilog On-line System (IMx), Multilog Condition Monitoring Unit(s) (CMU), Multilog Local Monitoring Unit(s) (LMU), and the cabling between the Multilog On-line System (IMx), Multilog Condition Monitoring Unit (CMU), Multilog Local Monitoring Unit (LMU), and the proprietary SKF communications interface with the host computer.

Five-year warranty

Products warranted for five (5) years by SKF are as follows: all standard seismic sensors (accelerometers and velocity transducers).

Other SKF Products

Any SKF Product supplied hereunder, but not covered by this limited warranty shall be either covered by the applicable SKF limited warranty then in place for such product or, if no such warranty exists, shall be covered by the 90-day warranty stated above.

Conditions

As a condition to SKF’s warranty obligations hereunder, the Buyer shall forward to SKF any Product claimed by the Buyer as being defective and it will be replaced if determined by SKF to conform to this limited warranty.

SKF shall not be obligated under this limited warranty or otherwise for normal wear and tear or for any Product, which, in SKF’s sole judgment, been subjected to accident, abuse, misapplication, improper mounting or remounting, improper lubrication, improper repair or alteration, or maintenance, neglect, excessive operating conditions, or for defects caused by or attributable to the Buyer, including, without limitation, Buyer’s failure to comply with any written instructions provided to Buyer by SKF. SKF shall be free to conduct tests, investigations, and analysis of the Products returned to SKF, as it deems reasonable and proper in the exercise of its sole judgment.

Except warranty of title and for the warranties expressly set forth in herein, it is understood and agreed that:

(a) SKF makes no other warranty, representation, or indemnification, either express or implied, including, without limitation, any implied warranty of merchantability, fitness for a particular purpose, or non-infringement; (b) In no event shall SKF be liable or obligated for special, exemplary, punitive, incidental, direct, indirect, general or consequential damages, including, by way of example only, lost of profits or savings, loss of business or loss of use, or any other loss, cost, or expense in connection with the Products provided by SKF. This disclaimer shall extend as well to any liability for nonperformance caused by SKF’s gross or ordinary negligence, and in all cases, regardless of whether or not any of the foregoing were foreseeable, or that SKF was advised as to the possibility of such damages, loss, cost, or expense;

(c) The foregoing limitations and disclaimers of liability shall be made applicable to the sale of any Product by SKF to the furthest extent permitted by applicable law.

The exclusive remedies provided in this limited warranty shall not be deemed to have failed of their essential purpose so long as SKF is willing and able to perform to the extent and in the manner prescribed in this limited warranty.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

SKF® STKFC200 - Manual Transmission Bearing and Seal Overhaul Kit

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!